Switching The Appliance On; Operating Tips - Bosch KDN Série Mode D'emploi

en
Controls
Fig. "
1
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
2
"Super" button refrigerator
compartment
Switches super cooling on and
off.
3
Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.
4
Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5
"Super" button (freezer
compartment)
Switches super freezing
on and off.
6
Temperature selection button
freezer compartment
The button sets the temperature
in the freezer compartment.
7
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
Note
When the appliance is not used for some
time, the display on the fascia switches
to ECO mode.
8
Switching
the appliance on
Press the On/Off button !/8.
Warning signal is emitted. When
the alarm button "/1 is pressed,
the warning signal stops.
The alarm button "/1 remains lit until
the set temperature has been reached.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
■

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.