Cleaning And Maintenance - Rommelsbacher KA 1800 Mode D'emploi

Those models are additionally equipped with an electric synchronised timer, which makes it possible for
you to automatically complete the preserving time. This timer has 2 operation modes:
Continuous operation (setting 'M')
Turn the knob anti-clockwise to the left.
During continuous operation (setting 'M') the timer will not switch off automatically. This setting is requi-
red for juice making or when food or drinks should be kept warm longer than 2 hours.
Automatic operation, time may be set infi nitely from 20 - 120 minutes
Turn the knob clockwise to the right.
For fully-automatic preserving calibrate the temperature selector to the appropriate temperature pursuant
to the preserving table. Then set the timer to the desired preserving time. Now, the automatic preserving
process will begin, with the pilot lamp glowing. Only when the pre-set temperature is reached, the timer
will be set going automatically and counting down the pre-set time (i. e. irrespective of the heating-up
time). The remaining preserving time can be gathered from the rotary switch anytime. Once the preserving
period has elapsed, the appliance will switch off automatically.
1. Preserving
As described under A.), but once you have selected the temperature (e):
• Set timer to the desired preserving period.
• The pilot lamp indicates operation of the timer (not the heating process!).
• The preserving procedure goes on automatically. Once the cooking time has elapsed the
appliance switches off.
• Once the cooking procedure is fi nished, reset the temperature selector to off-position
and pull the mains plug.
2. Juice making (juice-extraction top type EA 1803 is available in specialised trade)
As described under A.), but once you have selected 'Entsaften' (juice making) (f):
• Set timer to 'M' (continuous operation).
• The pilot lamp indicates operation of the timer (not the heating process!).
• Once the cooking procedure is fi nished, reset the selectors for temperature and time to off-
position and pull the mains plug.

Cleaning and maintenance

Always disconnect the mains plug prior to cleaning.
Never immerse appliance, mains plug and power cord in water!
Hazard of burns! Let all parts cool down before cleaning!
• Clean the pot outside and inside with a damp cloth.
• Calcareous residues, which may have formed can be removed from time to time with some vinegar
in water or with a standard descaling agent. Afterwards boil the appliance with clear water. This is
necessary as a calcareous layer may infl uence the heating performance and the temperature control.
• Wipe thoroughly dry after cleaning.
16