Edenwood ED75EA04UHD-RE Consignes D'utilisation page 47

C
Cleaning and maintenance
Trubleshooting
No picture or sound
Possible cause:
• The power cord, antenna cable, or input source is not plugged
in properly.
• The TV is not turned on.
Solution:
• Check the power cord, antenna cable, and input source.
• Press the STANDBY button on the remote control.
• Turn off the TV and turn it back on five seconds later.
No sound
Possible cause:
• Either the volume is too low or the sound is muted.
• The sound system is misconfigured.
Solution:
• Turn up the volume.
• Turn the sound back on by pressing the MUTE button .
• Adjust the sound configuration.
Noise or Snow Effect
Possible cause:
• The antenna cable is damaged or improperly connected.
• The chain is installed incorrectly.
• The antenna is incorrectly positioned.
Solution:
• Check the antenna cable and its connection.
• Adjust the chain manually.
• Adjust the position of the antenna.
Black and white image
Possible cause:
• The antenna is incorrectly positioned.
Solution:
• Adjust the color configuration.
• Adjust the position of the antenna.
48 EN