Edenwood ED75EA04UHD-RE Consignes D'utilisation page 17

B
Connection cables
Connecting to the Power Source
1. The TV is in a standby state when no picture appears and the red light is
illuminated.
2. Press the sleep button on the TV remote again, and the light will glow blue.
Connecting the External Antenna to the Unit
Cable TV
We recommend using a 75 Ω antenna cable to eliminate interference caused by
poor impedance matching. The antenna cable should not be close to the power
cord.
Insert the 75 Ω antenna cable plug directly into the antenna jack when using cable
TV.
NOTE
:
The antenna should be checked periodically. If a clear image is not
displayed, turn off the power and then check the antenna carefully.
Product usage
18 EN