Edenwood ED75EA04UHD-RE Consignes D'utilisation page 45

B
Product usage
•
Auto Sleep
Set the amount of time that you would like the TV to auto power off after a
period of no activity : Off, 3H, 4H.
•
Auto Standby with No Signal
TV will go to standby if there is no signal after the set time: Off, 15min.
Set Usage Mode
•
Home Mode
Select Home Mode for normal TV usage.
If you want to switch to Home Mode when the TV is in Store Mode, press
button on remote control to select
Advanced Settings > Usage Mode and choose choose Home Mode.
Upgrade
> All Settings > Support > System Update
Set your TV to receive the latest firmware.
Auto Upgrade
Set your TV to automatically receive the latest firmware.
Check Upgrade
Check to ensure that your TV has received the latest
firmware.
Note: Please ensure your TV is connected to the Internet.
Upgrade From USB
Upgrade TV software from USB device.
NOTE:
Please ensure the USB flash drive insert to USB2.0 port of the TV.
The updating files must be available in root directory.
The format of the USB must be FAT32 and the partition table type
must be MBR.
E-Manual
> All Settings > Support > E-Manual
Launch the E-Manual and get to know more about your TV.
All Settings, then select System >
46 EN