Edenwood ED75EA04UHD-RE Consignes D'utilisation page 20

B
NOTE
:
The symbols and position of the remote controls may vary by model.
Preparing the remote control
Insert two AAA batteries into the remote control according to the polarity (+/-)
symbols indicated. (Batteries not included)
Different types of batteries or new and used batteries should not be mixed. Batteries
must be set up in a polarity manner. Used batteries should be removed from the
product. Batteries should be disposed of safely. Place them in designated collection
bins (check with your retailer) to protect the environment.
WARNING!
Batteries should not be exposed to excessive heat such as sunlight,
fire, or similar origin.
Product usage
Remarks:
The remote control must be used within the
effective reception range of the television. Point
the remote at the TV's IR receiver and make sure
there are no obstacles in between. Its normal
operating distance will be reduced by direct
sunlight or light from a lamp. Caution when using
the remote control. Do not drop it, step on it, or
expose it to liquids.
21 EN