Commissioning Of The Device; Upgrading The Device - STEAMAX GX350 Manuel D'utilisation

STEAMAX GX350 – COMMISSIONING OF THE DEVICE
Operating Instructions
Fully charge the four necessary and replaceable 18650 batteries with a constant discharge current ≥ 25
A before first use. Please take note of the positive and negative poles in the battery compartment. Ensure
that there is no visible damage to the surface of the battery cells. The device has a 510-pin connection
with a spring-loaded connector, making it suitable for a variety of sub-ohm-capable clearomizers.
How to install and charge the Batteries
Open the battery compartment by lightly pulling up the cover. Then place
the four charged 18650 batteries in the device according to the poles
indicated. Close the battery compartment.
You have to charge the 18650 batteries with an external charger.

Upgrading the Device

For upgrading the device, connect it via supplied micro USB cable to a PC in order to
download a software update.
55
www.steamax.com