Online Help And Information; Introduction; 2�1 Employed Symbols - Renfert Basic Prebonder Mode D'emploi

1

Online help and information

Here you will find the following documents and information for download:
- Operating Instructions
- Quick Start Guide
- Spare parts lists and spare parts drawings
- Maintenance manual
- FAQs, cause and rectification of faults
- How to - Videos
- Declarations of conformity
Please note: The documents and information listed are not available for all products�
2

Introduction

2.1 Employed Symbols
In these instructions or on the unit itself you will find symbols which have the following meaning:
Danger
This indicates an imminent risk of injury. In these instructions or on the unit itself you will find
symbols which have the following meaning.
Electrical hazard
There is a risk of electrical shock.
Attention
Failure to observe the associated information can result in damage to the unit.
Note
The operating instructions contain useful information to make handling easier.
Attention!
Wear eye protection.
The unit complies with the relevant EC guidelines.
This product complies with the relevant UK legislation.
See UKCA Declaration of Conformity in the Internet under www.renfert.com.
The unit is subject to the EC guidelines 2002/96/EG (WEEE Directive).
► List, particular attention should be paid
• List
- subordinate list
⇒ Instructions / required action / input / operational sequence:
You are asked to carry out the specified action in the order indicated.
♦ Result of an action / response by the equipment / response by the program:
The equipment or program responds as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
https://www�renfert�com/basic-prebonder
- 3 -
en