Daily Cleaning And Maintenance - Wilfa Volo Multi Grind Manuel D'instructions

EN EN
DESCALING
Fill the water tank with water up to the MAX
line. Pour descaling agent into the water tank.
Use a container that is larger than 1.6L when
descaling. Empty it before starting the 2nd
phase.
1. After the machine is preheated, press and
hold the auto clean button for 5 seconds.
2. Press espresso button to start the 1st
phase cycle.
3. When the 1st phase is finished, the Lungo
icon is lit. Press it to start the 2nd phase.
4. When the 2nd phase is finished, the
machine goes back to normal function.

DAILY CLEANING AND MAINTENANCE

Press the cleaning button on the display to
clean the milk frother system.
This procedure must be performed after each
preparation with the milk container or the
steam wand.
Do not use any strong cleaning agent or sol-
vent cleaner. Use a damp cloth and mild clea-
ning agent to clean the surface of the machine.
Do not put any components in the dishwas-
her.
There may be condensation, and that water will
end up in the drip tray. Empty it and clean the
tray before it overflows.
Lift the lever, take out all the capsule or ground
coffee of the adapters. Remove the drip tray,
empty it and rinse. Remove water tank, and
rinse with water before filling it with fresh water
for use. Insert the adapter, close the lever, pla-
ce a container under the coffee dispenser, and
press the Lungo button to rinse the machine.
Do not store the machine in a cold environ-
ment, it may freeze the water in the machine
and cause damages and leakage.
10