Specifications - Wika R-1 Mode D'emploi

8. Specifications

8. Specifications
8.1 Specifications
EN
Depending on the selected instrument version (e.g. seals) the specification may deviate from the specifications listed
here. The specifications in the order documentation are definitive.
For further specifications, see WIKA data sheet PE 81.45.
DE
Specifications
FR
Measuring range
Maximum working pressure
ES
Overpressure limit
Max. measured error per
IEC 61298-2
Output signal
Auxiliary power
Current supply
Current (2-wire):
Voltage (3-wire):
Ratiometric (3-wire):
Pin assignment
Short-circuit resistance
Reverse polarity protection
Material (wetted)
14
→ See product label
→ Corresponds to the upper measuring range value / measuring range full scale value
→ Any permanent operation above the maximum working pressure is not permissible
2 times
The overpressure limit is based on the measuring range. Depending on the selected process
connection and the seal, restrictions in overpressure limit can result.
→ For the overpressure limit per process connection, see IN 00.14.
≤ ±2 % of span
→ See product label
→ See product label
Signal current, max. 25 mA
5 mA
5 mA
→ See product label
S+ vs. U-
U+ vs. U-
WIKA Operating instructions, model R-1