Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
007284
OPERATION
Sharpening blade/knife
After you have established the correct coolant flow, you
can begin sharpening. Sharpen with the cutting edge
away from you, holding the sharpening holder with both
hands. Slide the sharpening holder back and forth on the
sharpening platform guide at a speed of about ten times
per minute, applying uniform pressure (about 5 kg (11
lbs)) on it.
007286
CAUTION:
Always use sharpening platform guide or guide
•
assembly (optional accessory) when sharpening
blade/knife.
Remove some stock from the tip to the heel in relation to
the original grinding angle so as to create a better cutting
edge.
2
1
007287
1. Drain hose
(Vinyl tube)
1
1. Original (proper)
grinding angle
2. Take down this
area slightly in
relation to
3
original angle
3. Tip (correct
sharpening
angle)
Sharpening power planer blades
Sharpen your planer blades to 40° angle.
2
007288
CAUTION:
Clean and dry the tool after operation.
•
Be sure that the tool is switched off, unplugged and
•
drained before attempting to move the tool.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Grinding wheels (#60, #1000, #6000)
•
Wrench
•
Guide assembly (sharpening platform guide)
•
7
1. Approx. 40 ﾟ
2. Planer blade
1
or
attachments
Only use
accessory or
are
Publicité
Table des Matières
