Delivery Scope; Intended Use; Technical Data - Bosch GST 25 Metal Professional Notice Originale

OBJ_BUCH-1300-001.book Page 13 Tuesday, August 31, 2010 8:14 AM
Symbol Meaning
GST 25 Metal: Jigsaw with
constant electronic and
bow handle
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings
and all instructions
Before any work on the ma-
chine itself, pull the mains
plug from the socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Sawdust blower device
When sawing metal, apply
coolant/lubricant along-
side the cutting line
Low stroke rate
High stroke rate
Switching On
Switching Off
Bosch Power Tools
Symbol Meaning
On/Off switch lock-on
Prohibited action
P Rated power input
1
n No-load stroke rate
0
Cutting capacity, max.
Wood
Aluminium
Metal
Weight according to
EPTA-Procedure 01/2003
/II Symbol for protection class
II (completely insulated)
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibrational emission value
h

Delivery Scope

Jigsaw.
Splinter guard, parallel guide, application tools
and other accessories shown or described are
not part of the standard delivery scope.
A complete overview of accessories can be
found in our accessories program.

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts. The saw blade recommendations
are to be observed.

Technical Data

The technical data of the machine are listed in
the Table on page 194.
1 619 P08 931 | (31.8.10)
English | 13