Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the heat level and in the event of excessive
heat switch off the power tool and allow to
cool before restarting work. Some power
tools depending on design may be more
quickly and effectively cooled by running
at high speed without load.
s.
The power tool will draw in dust
through the vents on its body. Excessive
accumulation of powdered metal may
cause an electrical hazard and destroy the
tool. ALWAYS ensure the environment
dust level is safe for the tool and ensure
the vents are not blocked.
t.
DO NOT reach under the workpiece,
rest the workpiece on your body, or
hold the workpiece while working on it,
as contact with the blade or accessory
protruding from the workpiece can
result in serious injury.
u.
Anti-vibration gloves should be worn
when operating power tools that pro-
duce large amount of vibration, espe-
cially during long-term use.
v.
For power tools with a rotating mecha-
nism and accessories ensure the oper-
ator is not wearing clothes or gloves
with frayed threads, cords etc. that
could be entangled in the rotating
mechanism dragging the operator's
hand into the rotating accessory caus-
ing injury. ALWAYS wear tight-fitting work
clothes, safety shoes. Remove jewellery
and secure long hair. NEVER wear fab-
ric-based gloves that can produce strands
of material when operating this type of
power tool.
w. DO NOT allow sanding sheets to wear
away on the sanding pad. This will dam-
age the surface of the pad requiring
replacement and may cause parts of the
sanding sheet to fly off the pad, causing
operator injury.
x.
DO NOT touch the moving sanding
sheet.
y.
Wire brush bristles are thrown by the
brush even during ordinary operation.
DO NOT overstress the wires by applying
excessive load to the brush. The wire
bristles can easily penetrate light clothing
and skin.
7062510-Cordless_Multitool-Ma-#-WoF-1703-30.indb 13
Note: The tool must ONLY be used for its
intended purpose. Any use other than those
mentioned in this manual will be considered a
case of misuse. The operator, and not the
manufacturer, shall be liable for any damage or
injury resulting from such cases of misuse. The
manufacturer shall not be liable for any modifi-
cations made to the tool, nor for any damage
resulting from such modifications.
BEFORE FIRST USE
Remove the machine and the accessories from
the packaging. Check the machine for trans-
port damage and do not use the machine in
case of damages. Keep the packing materials
away from children, risk of suffocation!
INTENDED USE
Battery-powered oscillating multi-function tool
with quick accessory-change mechanism,
designed for cutting and abrasive tasks by fast
oscillation of a blade, file or sanding pad.
PREPARING THE TOOL FOR USE
Dust Extraction
The multi-function tool can be connected to a
vacuum cleaner or dust extraction system with
the dust extraction flange (1). Attach the flange
to the tool and connect it to the extraction
hose.
Fitting a Blade or Scraper
1.
Lift the quick release (2) and push forward
to disengage the clamping mechanism.
Note: This requires some strength.
2.
Fit a compatible blade or accessory to the
accessory mounting (12).
3.
Ensure the correct orientation of the blade
or accessory on the accessory mounting
so it faces the required direction.
4.
Secure the blade or accessory with the
quick release bolt (10) and return the
quick release to the closed position.
Note: Blades or scrapers that are cranked or
bent must be mounted on the tool so that the
end of the blade sits facing away from the
machine.
.
English
13
30-03-17 14:38
Publicité
Table des Matières
