Honda Power Products HHH25D Manuel De L'utilisateur page 40

6.If the choke lever has been moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
Hot Restart
If the engine is operated at higher ambient temperatures then turned
off and allowed to sit for a short time, it may not restart on the first
pull.
If necessary, use for following procedure:
IMPORTANT SAFETY PRECAUTION
Turn the engine switch to the OFF position before performing the
following procedure. This will prevent the engine from starting and
running at maximum speed when the throttle is in the full throttle
position. If the engine starts, with the throttle in the full throttle
position, the cutter blade can move at maximum speed. This may result
in personal injury.
1.Turn the engine switch to the OFF position.
2.Move the choke lever to the OPEN position.
3.Hold the throttle lever in the full throttle position (FAST).
4.Pull the starter grip 3 to 5 times.
5.Follow the STARTING THE ENGINE procedure on page 34 and start
the engine with the choke lever in the OPEN position.
OPEN
OPEN
CHOKE LEVER
37