Honda Power Products HHH25D Manuel De L'utilisateur page 35

6.Cutter blade inspection
For safety, check the blade for wear and damage and check the
tightness of the bolts and nuts before starting the engine. Operating
the hedge trimmer with a worn, cracked, or damaged blade can cause
a personal injury or equipment damage. A worn, cracked or damaged
blade can break and pieces of the damaged blade can hit the operator
or bystanders causing death or serious injury.
CAUTION:
Wear heavy gloves to protect your hands, when working around the
blade.
1.Stop the engine and make sure that the engine switch is in the OFF
position.
2.Remove the cutter blade cover with heavy gloves on your hands.
3.Check the bolts and the nuts for looseness. Tighten up the bolts and
nuts if they are loose. If you cannot do it properly, consult an
authorized Honda dealer.
BOLTS/NUTS
[HHH25D]
4.Check the blade and guard for wear, bend, crack, discoloration from
heat, and other damage. If there is a problem with them, consult an
authorized Honda dealer.
32
[HHH25S]
NORMAL
BENT
BOLTS/NUTS
WORN
CRACKED