Operating Instructions; Operating The Tool - Orgapack OR-H 20 A Mode D'emploi Et De Sécurité

6
Fig. 4
Fig. 5
Fig. 6
08.03/WE
OPERATING INSTUCTIONS
1
1

6.1 OPERATING THE TOOL

– Draw strap from reel and place tightly around the
package. Grip strap with the left hand approx. 30 cm
(12") from the beginning of the strap.
– Hold the handle of the tool in the right hand and
raise the motor up to the stop.
– Move the tool towards the straps up to the stop.
The beginning of the strap projects approx. 5 cm (2")
outside the front of the tool.
– Release the motor.
The straps are now clamped and inserted in
the tool. If the straps are not correctly
inserted, tensioning is not possible.
Tensioning
– Press the green button (5/1) completely down with
the thumb of the right hand. Release green button.
The strap is tensioned until the air motor stops.
The tensioning force can be infinitely
adjusted (see chapter 7.1).
Interrupting the tensioning process
– Press catch (6/1) to the left, green button rises and
tensioning is interrupted.
If the items to be strapped are mainly
delicate products, it is recommended to
remove the catch. The green button will then no longer
be locked when pressed down.
ORGAPACK OR-H 20 A
23