Safety Instructions - Orgapack OR-H 20 A Mode D'emploi Et De Sécurité

ORGAPACK OR-H 20 A
3
jklsfjklsdj
lksdfjkl
jkljsdllkjjkljsd
fkljjklkjkljsdafj
asdfjklkjjkljklj
ksldafkjkljkl
jkljklkljsdafjlkj
jkljjkljklkljljlk
max.6 bar
6 8 10
4 12
2 14
0 16
20

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating
instructions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap
forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is
tensioned. The strap
could break!
Caution:
Danger of squeezing!
Do not put your fingers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exeed the
recommended air
pressure.
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling.
Original
ORGAPACK
Use for the intended purpose
The tool is intended for strapping flat packages, pallet
loads etc.
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.
Possible misuse
The use of plastic straps is not possible.
Do not use a bottled
air or gas source!
Do not operate this tool
by using a bottled air or
gas source.
For suspending the
tool, only spring balan-
cers which conform to
the safety regulations
should be used.
Original ORGAPACK
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
08.03/WE