Operating Instructions; Operating The Tool - Orgapack CR 208 P Mode D'emploi Et De Sécurité

ORGAPACK CR 208 P
4

4.1 OPERATING THE TOOL

– Draw the strap from the dispenser, slide the strap
through the seal (4/1) and wind strap around the
package.
– Push the strap start a second time through the
seal.
– Bend the strap start below the seal 3–4 cm (1–2").
– Pull the strap tightly by hand and take a portion of
the strap leading to the dispenser with the left hand
approx. 20 cm (8") away from the seal.
– Hold the tool with the right hand and pull the motor
against lever.
– Insert the strap below the feed wheel, at the same
time push the tool forward against the seal.
– Release the lever.
16
OPERATING INSTUCTIONS
Fig. 1
Fig. 2
Fig. 3
1
1
08.05/WE