Safety Instructions - Orgapack CR 208 P Mode D'emploi Et De Sécurité

3
jklsfjklsdj
lksdfjkl
jkljsdllkjjkljsd
fkljjklkjkljsdafj
asdfjklkjjkljklj
ksldafkjkljkl
jkljklkljsdafjlkj
jkljjkljklkljljlk
6 8 10
4 12
2 14
0 16
max.6 bar
08.05/WE

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating
instructions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion and
stand safely away from
the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fingers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body between
the strap and the package
during the strapping
process.
Do not exceed the air
pressure!
Do not exeed the recom-
mended air pressure
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling
Original
ORGAPACK
Original
ORGAPACK
Use for the intended purpose
The tool is intended for strapping heavy round
packages, bundles of sectional steel, pipes etc.
(together with sealer).
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.
Possible misuse
The use of plastic straps is not possible.
ORGAPACK CR 208 P
Do not use a bottled
air or gas source!
Do not operate tis tool by
usining a bottled air or
gas source
Caution:
If work is carried out
using a spring balancer,
only a spring balancer
that complies with the
safety regulations may
be used.
Original ORGAPACK
seals must be used
exclusively.
Original ORGAPACK
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
15