Replacing The Light Bulb; Shipment And Repositioning; Transportation And Changing Of Installation Position; Repositioning The Door - Candy CVDS 5142S Notice D'utilisation

Replacing The Light Bulb

To replace the bulb in freezer and fridge departments;
1- Unplug your fridge.
2- Remove the cover of the box from the claws using a screwdriver.
3- Replace with a bulb of maximum 15 Watts.
4- Install the cover.
5- Wait for 5 minutes before re-plugging and bring the thermostat to its original position.
Replacing LED Lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.

SHIPMENT AND REPOSITIONING

PART - 5.

Transportation and changing of installation position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
• Remove
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during
transportation.
Carry your fridge in the upright position.

Repositioning the door

• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorised Service to have the opening direction changed.
movable parts
re-positioning
(shelves,
and
EN - 12 -