Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
PIPE THREADER
• Always use the support device provided with the
tool. Loss of control during operation can result in
personal injury.
• Keep sleeves and jackets buttoned while operat-
ing the tool. Do not reach across the tool or pipe.
Clothing can be caught by the pipe or the tool resulting
in entanglement.
• Only one person must control the work process
and tool operation. Additional people involved in
the process may result in unintended operation and
personal injury.
• Keep floors dry and free of slippery materials such
as oil. Slippery floors invite accidents.
• When threading or backing die head off pipe,
firmly hold the tool to resist forces regardless
of support device used. This will reduce the risk of
striking, crushing and other injuries.
• Do not use dies that are showing signs of wear,
dull, or damaged. Sharp cutting tools require less
torque and the tool is easier to control.
• Only use Ridgid
12-R or R12+ series or equivalent
®
die heads. Other die heads may not fit correctly in
the tool increasing the risk of equipment damage and
personal injury.
• Do not store die heads in tool to prevent metal on
metal wear.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2874-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Capacity .................... 1/8" - 2" (3.2 mm - 50.8 mm)
Die Head... Ridgid
®
No Load RPM .................................... 0 - 29 / 0 - 41
SYMBOLOGY
Volts
Direct Current
Safety alert symbol
Read operator's manual
Do not wear gloves while pushing
on or near moving parts
Always use support arm
Keep hands away from moving parts
UL Listing for Canada and U.S.
C
US
FUNCTIONAL DESCRIPTION
4
3
2
1
10
1. Side grip
2. Die head lock ring
3. Support arm bracing point
4. Carry handle
5. Internal battery
6. ONE-KEY™ indicator
7. Trigger
8. Control switch
9. Speed selector
10. Torque keys
11. Support clamp
12. Tightening arm
13. Support arm
14. Jaws
3
12-R/R12+ series or equivalent
6
5
9
11
12
14
7
8
13
Publicité
Table des Matières
