Replacing The System Outer Foil And The Inner Blades - Panasonic ES8109 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn the shaver
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
the shaver. This may cause the shaver to turn off or enter turbo
mode. Place your fingers on the finger rest while using the
shaver.
Replacing the system outer foil and the inner
blades
system outer foil
inner blade
Replacing the system outer foil
1
2
3
10
once every year
once every two years
1. Press the foil frame release
buttons and lift the system
outer foil upwards as
illustrated.
. Press the system outer foil
release buttons and pull down
the system outer foil as
illustrated.
3. Insert the system outer foil
until it clicks.
Always attach the system
outer foil in proper direction.
Always insert the system
outer foil to the foil frame
when attaching to the shaver.
Replacing the inner blades
1
2 3
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self-cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the detergent
cartridge.
1. Press the foil frame release
buttons and lift the system
outer foil upwards as
illustrated.
. Remove the inner blades one
at a time as illustrated.
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click as
illustrated.
1. Be sure to remove the water
tank and the appliance plug
from the self-cleaning
recharger.
Be careful not to spill the
cleaning liquid.

Publicité

Table des Matières
loading

Table des Matières