Replacing The System Outer Foil And The Inner Blades - Panasonic ES-LV6Q Mode D'emploi

► Cleaning with the long brush
Clean the outer foil section, system
outer foil, the shaver body and the
trimmer using the long brush.
► Cleaning with the short brush
• Clean the inner blades using the short
brush by moving it in direction as
illustrated.
• Do not move the short brush
perpendicularly against the blades as
it will damage the inner blades and
affect their sharpness.
Replacing the system outer foil and
the inner blades
appears on the lamp display once a year. (Based on one
3‑minute shave use per day)
We recommend checking the system outer foil and the inner
blades when it appears.
Press the power switch for more than 30 seconds to turn off
Even if is not turned off right after the replacement, it will
automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
14
ES-LV6Q_US.indb 14
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the foil
frame.
2. Align the foil frame mark (
( ) and securely attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
.
Note
Do not throw away the foil frame.
) to the front,
) and the system outer foil mark
2018/03/02 15:53:10