Description Of Device; Overview - Article Numbers; Unpacking; Mounting - Abus eyseo PROFILINE TVCC50030 Manuel Utilisateur

5. Description of device

5.1 Overview – article numbers
Article number
Resolution
WDR
DNR
Day/Night
(removable IR cut-filter)
Operating voltage

5.2 Unpacking

While you are unpacking the device please handle it with utmost care.
If you notice any damage of the original packaging, please check at first the device.
If the device shows damages, please contact your local dealer.

6. Mounting

6.1 Power supply

Before you start with the installation please make sure that the main voltage and the nominal
voltage of the camera comply together.
TVCC50030
(1) TVCC50030 is run by a 12 VDC / 24 VAC power supply. The polarity can be ignored.
In order to connect a 12 VDC power supply (DC Connector 5.5mm x 2.1mm) to the camera
you have to first install the included connector cable. Therefore you need to press the pins
and insert the cable ends into the terminals.
(2) TVCC50530 is run by a 110~240VAC power supply (preinstalled cable).
TVCC50030
650 TVL

2D/3D-DNR

12VDC/24VAC
TVCC50530
650 TVL

2D/3D-DNR

110-240VAC
TVCC50530
28