Festo DNCE LAS Série Notice D'utilisation page 41

DNCE−...−LAS
DNCE−...−LAS
1)
Rated stroke
Recommended min. speed
2)
Max. acceleration
Shifting resistance
at speed 0 m/s
Electrical specifications
CE symbol
(see conformity declaration)
Vibration tested according
to DIN/IEC 68/EN 60068 Part 2−6
Shock tested according
to DIN/IEC 68/EN 60068 Part 2−27
Protection class (mechanical system)
Protection class (el. connection)
Max. permitted motor
temperature
Ambient temperature
Storage temperature
Materials
Cylinder barrel, cover
Flange screws
Plain bearings, sensor
housing, cover flap
1)
Theoretical total stroke = rated stroke + stroke reserve
2)
At 23 °C ambient temperature
3)
Note temperature influence
4)
Peaks and permanent forces without consideration of friction è chapter 13 Characteristic curves"
Festo DNCE−...−LAS 1003b English
32
100 200
[mm]
[mm/s] 2
2
[m/s ] 115 125
[N] 5
To be used only in conjunction with the SFC−LACI
controller
In accordance with EU EMC directive
0.35 mm path at 10 ... 60 Hz
5 g acceleration at 60 ... 150 Hz
±30 g at 11 ms duration;
5 shocks per direction
IP40
IP65 (for DNCE−LAS−S1)
[°C] +70 (Warning at 70 °C; switch−off at 75 °C)
[°C] 0 ... +40 (loading capacity of electric cylinder depends on
ambient temperature)
[°C] 20 ... +60
Anodised aluminium
Galvanized steel
Polyacetate
40
320
100 200
115 75 125
11
320 400
115 90
16
41