Intended Use; Operation - Festool CT MINI Guide D'utilisation

[1-10] Switch
[1-11] Brake
Mobile dust extractor suitable for
– Extracting non-hazardous dust, dirt, sand and
chips,
– Extracting water,
– Increased loads during commercial use,
according to IEC/EN 60335-2-69.
Consider the pictures on the fold-out page.
WARNING
Unauthorised voltage or frequency!
Risk of accidents

Observe the specifications on the machine's
name plate.

Observe country-specific regulations.
Extension Cord
If an extension cord is required, it must have suffi-
cient cross-section to prevent an excessive drop in
voltage or overheating. An excessive drop in voltage
reduces the output and can lead to failure of the
motor. The table below shows you the correct cord
diameter as a function of the cord length for this
tool.
Total Extension Cord
Lenght (feet)
Cable size (AWG)
Use only U.L. and CSA listed extension cords.
Never use two extension cords together. Instead,
use one long one.
10

Intended use

25 50 100 150
14 12 not recom-
mended
The filtering performance of the overall unit, which
is fitted with a HEPA filter element, corresponds to
HEPA quality H 13 (medium degree of filtration
99.95%).
The user is liable for improper or non-in-
tended use.

Operation

 The lower the AWG number, the stronger the
cord.
Connecting the mobile dust extractor
WARNING
Risk of injury from tools starting up unexpectedly

Before setting the switch to the "AUTO" or
"MAN" position, make sure that the connected
tool is switched off.
The switch [1-10] serves as an on/off switch.
Switch position "0"
Appliance socket [1-2] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-2] is connected to the power,
the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-2] is connected to the power,
the mobile dust extractor starts when the connect-
ed tool is switched on.

Insert the plug into an earthed socket.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.