Tuthill FILL-RITE 901CL1.5 Manuel D'installation, D'utilisation Et De Service page 3

Safety Information
WARNING! To insure safe and proper operation of your equipment, it is critical to
read and adhere to all of the following safety warnings and precautions.
installation or use of this product can cause serious bodily injury or death'
1) NEVER smoke near the meter, or use the meter near open flames when
metering a flammable liquid' Fire can result'
2) A "Fill-Rite" Filter should be used on the meter outlet to insure no foreign
material is transferred
3) Threaded pipe joints and connections should be sealed with the appropriate
sealant or sealant tape to minimize the possibility of leaks.
4) Storage tanks should be securely anchored to prevent shifting or tipping
when full or empty.
5) To minimize static electricity build up, use only static wire conductive hose
when metering flammable fluids, and keep the fill nozzle in contact with the
container being filled during the filling process.
6) DO NOT exceed 50 psil
7) DO NOT install additional foot valve or check valve without a pressure relief
valve; cracking may result.
WARNING! This product should not be used to transfer fluids into any type of
aircraft.
WARNING! This product is not suited for use with fluids intended for human
consumption or fluids containing
Installation
Meters are furnished for horizontal
piping, left to right flow. Flow ports
can be changed to any of four
positions for horizontal or vertical
piping and for either direction of flow
I) Determine direction for fluid to
flow.
2) Install meter observing
directional arrow on casting
3) Remove four screws (item 28).
4)
Rotate meter cover assembly
(item 37) to desired orientation
5) Replace four screws (item 28).
CAUTION! Threaded
appropriate sealant or sealant tape to minimize the possibility of leaks.
to the fuel tank.
BARS line pressure.
water.
Flow Direction
pipe joints and connections should be sealed with the
3
Tüthill
Improper
Indicator