5.2
Setting the display location
The Mete-On 3 can display weather information of up to 60 regions in Europe. You will fi nd a pre-pro-
grammed selection of towns and cities in these regions in the device.
The weather region Berne/Switzerland is pre-set on delivery. Another location can be set as follows:
Press and hold (3 seconds) the key
The following settings can be made to the respective fl ashing segment.
• Country
Sixteen countries are available (the pre-programmed list of towns and cities in the Mete-On 3 is at-
tached at the end of these instructions).
The abbreviation for vehicles is used for each country (e.g. CH for Switzerland, D for Germany, F for
France, etc.)
The country can be selected with the keys ▼/▲.
Continue to the next setting: Press
• City
A different number of places is available per country. Please select the location nearest to your place
of residence. If you are unsure, there is a tool on the Internet page www.meteotime.com where the
region valid for your place is residence is indicated.
Each location is displayed with a 4-letter abbreviation (see list at the end of these instructions).
The appropriate location in the selected country can be selected with the keys ▼/▲.
Exit SET function: Press the key
The normal display then appears. If weather forecasts are available, these now appear in the display.
More on this in Chapter 6.2.
The required location can be changed at any time. The Mete-On 3 has all data received stored in the
memory.
6.
Operating the device
6.1 Display options in the INFO WINDOW
Key
Each time the key is pressed like this, the following info will be displayed sequentially:
- Running seconds (basic setting)
- Date ('DATE') in the format date/month
- Day of the week (according to the language selected, see Chapter 5.1)
- Selected location ('CITY')
- Precipitation probability ('RAIN') in % (if no data are yet available, dashes appear before the % sign)
6.2 Display options in the WEATHER WINDOW
• Weather and temperature forecasts
The forecasts and the temperature measured in the device are displayed here.
You can switch between the potential displays with the keys
8
8
Press down for approx. 3 seconds (until a short acoustic signal sounds out).
once.
and