Roller Plus H-R Mode D'emploi page 40

Revision date:
13.10.2017
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state:
Colour:
Odour:
pH-Value (at 20 °C):
Changes in the physical state
Melting point:
Initial boiling point and boiling range:
Pour point:
:
Flash point:
Lower explosion limits:
Upper explosion limits:
Ignition temperature:
Decomposition temperature:
Vapour pressure:
(at 20 °C)
Density (at 20 °C):
Water solubility:
Partition coefficient:
Viscosity / dynamic:
Viscosity / kinematic:
(at 20 °C)
Flow time:
Vapour density:
Evaporation rate:
9.2. Other information
No information available.
SECTION 10: Stability and reactivity
10.1. Reactivity
No information available.
10.2. Chemical stability
No information available.
10.3. Possibility of hazardous reactions
No hazardous reaction when handled and stored according to provisions.
10.4. Conditions to avoid
Heat.
10.5. Incompatible materials
No information available.
10.6. Hazardous decomposition products
No information available.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Revision No: 1,9 - Replaces version: 1
Safety Data Sheet
according to Regulation (EC) No 1907/2006
Roller's Plus H+R
Article No.: 115607
liquid
yellowish
characteristic
No information available.
GB - EN
Test method
2,5 DIN 51369 (10 g/L)
not determined
not determined
not applicable
ASTM D 1015
not applicable
not applicable
not applicable
not determined
ca. 23 (H2O) hPa
1,2 g/cm³ DIN EN ISO 12185
miscible
not determined
not determined
not determined DIN 51562
not determined
not determined
not determined
Page 4 of 7
Print date: 11.12.2017