Grease Filters; Lamp Replacement - AVG AVP286PPS Instructions D'installation Et Guide De L'usager

GREASE FILTERS

INSTALLING GREASE FILTERS
To install filter, follow these (4) four steps:
1. Angle the filter into designed slots on the hood.
2. Pull the handle fastener of the filter.
3. Release the handle once the filter is into position.
4. Repeat to pull out
CLEANING GREASE FILTER
The grease filter should be cleaned by hand, do not put in dishwasher. Soak it for about 3 minutes in warm soapy
water using a mild detergent if necessary brush gently with a soft brush. Do not apply pressure to avoid damage it.
Leave to dry naturally. Filters should be washed separately from tableware and other kitchen utensils. Do not to use
a rinse aid .

LAMP REPLACEMENT

Note: Before changing the lights, make sure that the appliance is switch off and unplugged. To protect your hands,
we suggest wearing protective gloves
IMPORTANT
REPLACING THE LED LAMPS
1.
Switch off and unplug the unit
2.
Remove the filter
3. Remove the defective lamp from the socket
4.
Gently pull the lamp wire and unplug
5. Replace the defective lamps(s) and reconnect the wire connection
6.
Reinsert the lamp in the socket and replace the filters in place.
.

The bulb should be replaced by the manufacturer, its service agent or a qualified
electrician. Always switch off the electricity supply before carrying out any
operations on the appliance.

When handling bulb hold it with a cloth or gloves to ensure perspiration does
not come in contact with the globe as this can reduce the life of the light.
27