Hypertherm Powermax65 Mode D'emploi page 13
Bulletin de service sur le terrain; interface de machine pour accès à la tension d'arc brute
Masquer les pouces
Voir aussi pour Powermax65:
- Manuel de l'opérateur (184 pages) ,
- Guide (76 pages) ,
- Mode d'emploi (36 pages)
Publicité
Replace the power supply cover
1. Place the cover (3) over the power supply. Be careful not to pinch any wires.
2. Install the 16 screws into the power supply cover. Tighten the screws to 17.3 kg cm (15 in.-lbs).
Note:
Powermax65/85 system covers have 8 small screws (2) and 8 large screws (1). All 16 screws for
Powermax105/125 covers are the same size.
Front of
power supply
Field Service Bulletin
Machine interface for raw arc Voltage
1
2
2
1
1
1
2
3
2
1
11
Publicité
