FUXTEC FX-RM Serie Mode D'emploi page 54

Manual_FX-RM_Series_Int24_rev24
- Carefully replace all fuel tank and container caps
- Inspect the blades, bolts, and cutters for visible wear and damage before using the device.
Replace worn or damaged blades and bolts in sets to avoid imbalance.
- Never change the safety devices. Check their proper function regularly.
- Keep the device free from grass, leaves, and other residues. Remove any oil or fuel residues.
Let the device cool down before storing it.
- Be incredibly attentive when changing the mowing direction on slopes.
- Never attempt to adjust the cutting height while the engine is running.
- The crop catcher and its parts are subject to wear, damage, and abrasion, which could expose
rotating parts. This can lead to objects being thrown. Check the individual parts regularly and,
if necessary, replace them with original spare parts recommended by the manufacturer.
- The blades are sharp and cut precisely. Be careful when servicing the blades. Wrap the blades
in a cloth or wear protective gloves.
- Do not change the engine speed controller and do not overload the motor
- Be especially careful when moving the mower backward or towards you.
- Stop the blades when the mower needs to be tilted for transport, especially when crossing
surfaces other than grass.
- Disconnect all blades and control clutches before starting the engine.
- Start the engine carefully as described in the instructions, keeping your feet away from the
blades
- Do not tilt the lawnmower when you turn on the engine, except when the lawnmower needs
to be inclined to start. In this case, you should not tilt it more than necessary. Only lift the part
that is away from the user.
- Do not start the engine if you are standing in front of the outlet duct
- Never transport or carry a lawnmower while the engine is still running.
- Reduce the brake setting while turning off the engine and if the engine is equipped with a
shut-off valve. Turn off the fuel supply at the end of the mowing operation. Go slowly when
using a transport device.
54