Receiving Faxes - Epson WorkForce 435 Guide Rapide

Masquer les pouces Voir aussi pour WorkForce 435:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User's Guide.
1.
Place your original(s) for faxing (see page 6).
2.
Press the K
3.
Use the numeric keypad to manually enter the fax
number. You can enter up to 64 digits.
4.
To change fax settings, press x
5.
Press the x
Note: If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
If you are scanning with the ADF, your document is automatically scanned and
faxed.
If you placed your document on the scanner glass,
you see this screen after the first page is scanned:
If you need to fax additional pages, place your
original on the scanner glass or in the ADF. Then press
not need to fax another page, press
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
To cancel faxing, press y
Note: If you turn off the product, the following data stored in the product's temporary
memory will be lost: received faxes that haven't yet been printed, faxes scheduled to
be sent later, and faex being retransmitted automatically.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the
that matches the size of paper you've loaded. If the incoming fax pages are larger than the
paper size you loaded, the fax size is reduced to fit or printed on multiple pages, depending
on the
Auto Reduction
18
Sending a Fax From the Control Panel
button to select Fax mode.
Copy/Fax
Menu
or x
button to send your fax.
B&W
Color
Stop/Clear Settings
setting you select. See your online User's Guide for instructions.
and select settings as necessary.
1
. Your document is faxed.
2
Redial/Pause
at any time.
to continue. If you do
.
setting
Paper Size

Publicité

Table des Matières
loading

Table des Matières