Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head, see the online
User's Guide.
Caution: To keep your product looking like new, don't place anything on top of the cover
or use it as a writing surface. If you need to clean the cover, use only a soft, non-
abrasive microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1.
Load a few sheets of plain paper in the sheet feeder.
2.
Press x
.
Menu
3.
Press u or d to select
4.
Press u or d to select
button.
Color
x
5.
Check the nozzle check pattern that prints to see if
there are gaps in the lines.
Nozzles are clean
Note: If Auto Answer is turned on, press OK to continue.
6.
If there are no gaps, the print head is clean. Press
continue printing.
If there are gaps or the pattern is faint, press
, then press
Maintenance
, then press the
Nozzle Check
Nozzles need cleaning
.
OK
and then press x
1
to clean the print head (see page 22).
2
Maintaining Your Product
to
Menu
21
Publicité
Table des Matières
