Setting Up Fax Features - Epson WorkForce 435 Guide Rapide

In Auto Answer mode, if the incoming call is a fax and you pick up the phone or the
answering machine answers, the product automatically begins receiving the fax. If the
other party is a caller, the phone can be used as normal or a message can be left on the
answering machine.
Note: Any phone or answering machine must be connected to the
product to detect an incoming fax call when the phone is picked up. Epson cannot
guarantee compatibility with VoIP, cable phone systems, or fiberoptic digital services such
as FiOS™.

Setting Up Fax Features

Before sending or receiving faxes, you should create a fax header and select the number of
rings before the fax answers.
Note: To select other settings or use the Epson FAX Utility, see the online
User's Guide.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending faxes so
that recipients can identify the origin of the fax.
Note: If you leave the product unplugged for a long period of time, the date and time
settings may get lost. See the online User's Guide for instructions on resetting them.
Entering Your Sender Name
1. Press the r/K
2. Press u or d to select
3. Press u or d to select
4. Press to select
OK
5. Use the numeric keypad to enter your sender name or
other header information (see "Using the Keypad to
Enter Numbers and Characters" on page 17). You can enter up to 40 digits.
6. When you're done, press
16
Setting Up Fax Features
button to select Fax mode, then press x
Copy/Fax
, then press
Fax Settings
, then press
Header
.
Fax Header
to return to the Fax Header screen.
OK
.
OK
.
OK
EXT. port for your
.
Menu