Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User's Guide.
1.
Place your original(s) for faxing (see page 7).
2.
Press
, if necessary, and select
To fax a two-sided document, place your document in
the ADF. Press x Menu and select
. Then press
Settings
.
On
3.
Press
fax number (up to 64 digits). Then press
4.
Select
Color
Note: If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select Color.
5.
Press
, if desired, to see a summary of your fax transmission settings.
OK
6.
Press x to begin scanning and faxing your document. (To cancel, press y.)
■
If you are scanning with the ADF (see page 7), your document is automatically
scanned and faxed.
■
If you placed your document on the scanner glass, you can scan additional pages
after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
Note: If you turn off the product, the following data stored in the product's temporary
memory will be lost: received faxes that haven't yet been printed, faxes scheduled to
be sent later, and faxes being retransmitted automatically.
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the correct settings for the
paper you've loaded.
1.
Press
if necessary and select
2.
Press l or r and select
3.
Select
Scan & Print Setup
20
Sending a Fax From the Control Panel
2-Sided Scanning
, then use the numeric keypad to enter the
or
.
B&W
Setup
Fax Settings
.
.
Fax
Fax Send
and select
.
OK
Redial
.
.
.
Publicité
Table des Matières
