Faxing Problems; Print Quality Problems - Epson WorkForce 845 Guide Rapide

ADF Document Feeding Problems
If documents don't feed correctly in the Automatic Document Feeder (ADF), make sure
the paper is not bent, folded, or curled. If paper has jammed, open the ADF cover and
remove any jammed paper. Then lift the scanner cover and remove any pages caught
beneath it.
Caution: Do not try to remove the pages without opening the ADF cover or you could
damage the mechanism.

Faxing Problems

■ Make sure the recipient's fax machine is turned on and working.
■ Make sure the
LINE
that the telephone wall jack works by connecting a phone to it.
■ Make sure the
■
If your phone line includes voicemail answering services, turn off Auto Answer.
Otherwise, calls or faxes may be inadvertently received by your voicemail service.
■
If the line has static, press
Communication
■ If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
■ If you connected a telephone or answering machine, make sure it is connected to the
port. Do not use a phone splitter.
EXT.

Print Quality Problems

■ Make sure your paper is loaded printable side down (usually the whiter, brighter, or
glossy side).
■
For the best print quality, use Epson papers (see page 5) and genuine Epson ink
cartridges (see page 28).
■
Make sure the type of paper you loaded matches the paper type setting on the control
panel or in your printer software (see page 16).
port on the product is connected to a telephone wall jack. Verify
light is turned on to receive faxes automatically.
and select
. Turn off the and
V.34
, then select
Setup Fax Settings
(Error Correction Mode) settings.
ECM
Problems and Solutions
, and then
35