Faxing A Document - Epson WorkForce 845 Guide Rapide

Masquer les pouces Voir aussi pour WorkForce 845:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Faxing a Document

Your product lets you send faxes by entering fax numbers or selecting entries from a speed
dial list. Using the Automatic Document Feeder (ADF), you can fax up to 30 pages at a
time.
Note: You can also send/receive faxes from your computer using the Epson FAX Utility.
For more information, see the online User's Guide.
Breakdown or repair of this product may cause loss of fax data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the
warranty period. We recommend that you make your own backup or print out your fax
data and settings.
This product allows you to store names, telephone numbers, and fax data in its
memory even when the power is turned off. Use the following procedure to erase the
memory if you give away or dispose of the product: Select
Settings > Reset All Settings
fax data.
Connecting a Phone or Answering Machine
1.
Connect the phone cable from the wall
jack to the
port on the back of the
LINE
product.
Note: If you're connecting the product
to a DSL phone line, you must plug a
DSL filter into the wall jack or you
won't be able to use the fax or
telephone equipment. Contact your
DSL provider for the necessary filter.
2.
To use a telephone or answering
machine on the same line, you need a
second phone cable. Remove the cap
from the
port on the back of the
EXT.
product. Connect one end of the cable
to the telephone or answering machine,
and connect the other end to the
port.
Note: Set the printer ringer to answer
one ring after the answering machine.
This procedure will erase all of your network settings and
.
Telephone
wall jack
Telephone
wall jack
EXT.
Setup > Restore Default
Faxing a Document
17

Publicité

Table des Matières
loading

Table des Matières