Installer Checklist; Final Instructions - Bertazzoni Dw60S3Iapsp Manuel D'installation

INSTALLATION
ATTACHING THE KICKPLATE
The following options are available. Follow the supplied
instructions.
• Option 1: Attach the furniture kickplate.
• Option 2: Attach the adjustable plinth group. Follow the
instructions supplied with the adjustable plint group.

INSTALLER CHECKLIST

Your installer must have completed and checked the
following:
The dishwasher is square and level.
The dishwasher is fastened securely to the
cabinetry.
The dishwasher door opens and closes freely. The
dishwasher door must close without hitting any
cabinetry or countertop.
The inlet water supply is turned on and checked
for leaks.
The drain hose has been connected and checked
for leaks. There must be no kinks or obstructions
in the drain hose.
The drain hose must be installed with a 762 mm
(30") high drain loop for drain hook-ups without
any air removed.
Fig. 23
The drain hose must be installed with a 30"
(762 mm) high drain loop for drain hook-ups
without any air removed.
If you connect the water drain hose to a trap spigot
under the sink, remove the plastic membrane. If
you do not remove the entire membrane, leftover
food could cause a blockage in the drain hose
spigot. Ensure a hose clamp is used to secure the
hose to the spigot.
The spray arms are free and rotate freely.
The rinse cycle has been run.
The water level will be below the filter screen after
the end of the wash program. It is normal to find
some water in the drain filter area.

FINAL INSTRUCTIONS

Fig. 24
1) Press the On/Off button to turn the dishwasher on.
2) Power indicator light comes on.
3) Use the Program Select button to choose a washing
program.
4) Start the program with the Start/Pause button.
5) Run the dishwasher through one complete cycle. When
the wash cycle is completed, use the On/Off button to
turn the dishwasher off.
NOTE
If the dishwasher does not operate
properly, see the Self Help Tips.
23