Custom Door Panel (For Panel-Ready Models) - Bertazzoni Dw60S3Iapsp Manuel D'installation

INSTALLATION
CUSTOM DOOR PANEL (FOR PANEL-READY
MODELS)
The thickness of the custom panel may vary. A minimum
15 mm (9/16") thick panel is required, but the thickness can
be increased provided the panel does not exceed 11 kg
(24 lbs). Minimum panel weight is 5 kg (11 lbs). The custom
door panel template provided accommodates panels with
the dimensions specified below.
FRONT VIEW
E
• D 732 mm - 815 mm (28 13/16"- 32 1/16")
• E 595 mm - 597 mm (23 7/16" - 23 1/2")
The height of a custom plith may vary depending on the
height of the cutout opening and door panel, but must be
within the following range:
0 mm - 80 mm (0" - 3 1/8")
If the dishwasher feet are raised, the plinth can be raised by
an additional 50 mm (2").
A minimum space of 3 mm (1/8") is required between the
plinth and the panel.
12
D
Fig. 5