Main Brush, Direct Suction Option And Side Brushes; Cleaning The Side Brushes - ECOVACS ROBOTICS Deebot R95 Mode D'emploi

4. Maintenance

4.3 Main Brush, Direct Suction Option and Side Brushes

* A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
Cleaning the Main Brush
Turn the robot over. Push both buttons under the Main Brush towards the center of the robot.
Remove the main brush cover.
Remove the Main Brush.
Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush.
B
A
Pull out the plastic nut on the end of the Main Brush. Remove the plastic caps on both ends. Clean
any tangled hair or debris from both ends of the Main Brush and inside the plastic caps.
Cleaning the Direct Suction Option
Wipe the Direct Suction Option clean with a dry
cloth.
22
EN
B
A

Cleaning the Side Brushes

Remove the Side Brushes. Wipe the Side
Brushes and their slots with a dry cloth.