Change The Battery; Tamper-Resistant Battery Door - Cochlear Baha 7 Mode D'emploi

Change the battery

See figure 5
1. To replace the battery, remove your sound processor from the head and hold the
sound processor with the front facing down.
2. Gently open the battery door until it is completely open.
3. Remove the old battery and dispose of it according to local regulations.
4. Remove the new battery from the packet and peel away the sticker on the + side.
5. Insert the battery into the battery compartment with the + side facing up.
6. Gently close the battery door.
Warning
Batteries can be harmful if swallowed, put in the nose or in the ear. Be sure to
keep your batteries out of reach of small children and other recipients in need of
supervision. Before use, verify that the tamper-resistant battery door is properly closed.
In the event a battery is accidentally swallowed, or stuck in the nose or in the ear, seek
immediate medical attention at the nearest emergency centre.
Note
• To maximise battery life, switch off the sound processor when it is not in use.
• Battery life decreases as soon as the battery is exposed to air (when the plastic strip
is removed), so be sure to only remove the plastic strip directly prior to use.
• If a battery leaks, replace it immediately.

Tamper-resistant battery door

See figure 6
To prevent the accidental opening of the battery door, an optional tamper-resistant battery
door is available. This is particularly useful to prevent children, and other recipients in
need of supervision, from accidentally accessing the battery. Contact your hearing care
professional for a tamper-resistant battery door.
To use the tamper-resistant battery door:
1. To unlock and turn off the device, carefully insert the tamper resistant tool or the tip of
a pen in the small hole on the battery door and gently open the door.
2. To lock and turn on the device, gently close the battery door until it is completely closed.
Cochlear Baha 7 Sound Processor User manual part A
English
9