Sound Processor Indicators; Change Programs - Cochlear Baha 7 Mode D'emploi

Sound processor indicators

See figure 2
Audio signals and the visual indicator will alert you of changes to your sound processor. For
a complete overview see "Audio and visual indicators" on page 14.

Change programs

See figure 3
You can choose between programs to change the way your sound processor deals with
sound. You and your hearing care professional will have selected up to four pre-set
programs for your sound processor.
Program 1 ______________________________________________________________________________________
Program 2 ______________________________________________________________________________________
Program 3 ______________________________________________________________________________________
Program 4 ______________________________________________________________________________________
These programs are suitable for different listening situations. Ask your hearing care
professional to fill in your specific programs on the lines.
1. To change the program, press and release the control button located on the top of your
sound processor once.
2. If enabled, audio and visual signals will let you know which program you have changed
to. See "Audio and visual indicators" on page 14.
3. To change to any of the other programs pre-set by your clinician, repeat above steps
until you get confirmation that you are in the desired program.
Note
If you are a bilateral recipient, program changes you make to one device will
automatically apply to the second device. This function can be enabled or disabled by
your hearing care professional.
Cochlear Baha 7 Sound Processor User manual part A
English
7