Adjust Volume; Share The Experience; Power; Battery Type - Cochlear Baha 7 Mode D'emploi

Adjust volume

Your hearing care professional has set the volume level for your sound processor.
Note
You can change the program and adjust the volume using the optional Remote
Control, Cochlear Baha Remote Control 2, Cochlear Wireless Phone Clip, Baha Smart
App or from your compatible smartphone or smart device. See "Wireless devices and
streaming" on page 11.

Share the experience

See figure 4
Family members and friends can "share the experience" of bone conduction hearing using
the Cochlear test rod, provided with the sound processor.
1. Turn on your sound processor and attach it on the test rod by tilting it into place. You
will feel the snap coupling "click" into the notch on the test rod.
2. Hold the test rod against the skull bone behind an ear. (Ensure you are holding the test
rod, and not the sound processor). Plug both ears and listen.

Power

Battery type

The Baha 7 Sound Processor uses a 312 size type hearing aid battery (1.45 Volt zinc air,
non-rechargeable). Batteries should be replaced as needed, just as you would with many
other electronic devices. Battery life will vary with e.g. daily use, volume levels, wireless
streaming, sound environment, program setting, and battery strength.

Low battery indication

If activated, the visual and audio signals will alert you when there is approximately one hour
of battery power remaining (at this time you may experience lower amplification). If the
battery runs down completely, the sound processor will stop working.
8 Cochlear Baha 7 Sound Processor User manual part A