Publicité
4) Power Tool Use and Care
a.
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b.
Do not use the power tool if the switch
does not turn on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c.
Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
d.
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e.
Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g.
Use the power tool, accessories, tool
bits, etc. by these instructions, taking
into account the working conditions
and the work to be performed. Use of
the power tool for operations different from
those intended could result in a hazardous
situation.
h.
Keep handles and grasping surfaces
dry, clean, and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) Battery Tool Use and Care
a.
Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
b.
Use power tools only with specifically
designated battery packs. Use of any
EN - 4
other battery packs may create a risk of
injury and fire.
c.
When the battery pack is not in use,
keep it away from other metal objects
such as paper clips, coins, keys, nails,
screws, or other small metal objects
that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts the eyes, seek
additional medical help. Liquid ejected
from the battery may cause irritation or
burns.
e.
Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit unpredictable
behavior resulting in fire, explosion, or risk
of injury.
f.
Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 266°F (130 °C)
may cause an explosion.
g.
Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6) Service
a.
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b.
Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
SAFETY WARNINGS FOR
RECIPROCATING SAWS
a.
Hold the power tool by insulating
gripping surfaces when operating
where the cutting accessory may
contact hidden wiring. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
• Reciprocating saws with an integral
WWW.SENIXTOOLS.COM
Publicité
