Publicité
5.
Blade breakage may occur if the blade does
not extend past the shoe and the workpiece
during the cut. A properly sized workpiece
is important for operation
WARNING:
.
To prevent injury, do not work on materials
thicker than the minimum blade extension at
their maximum thickness. Blade tip can strike
the workpiece and may shatter.
PVC Pipe
EN - 10
SWITCHING ON/OFF
Switch the trigger lock off, then squeeze the
trigger to start the saw.
The saw stops once the trigger is released.
When the tool is not in use, turn the trigger
lock to the "Lock" position in case of an
unintentional start.
Trigger Lock
Rear Trigger
SHOE SETTING
The saw is designed with an adjustable shoe
to allow for cutting with different parts of the
blade. Set the shoe to a suitable position while
pressing the shoe release.
WORK LIGHT SETTING
Press the light control button on the saw body
to turn on the work light or adjust to a suitable
brightness for greater visibility of the work
area.
Front Trigger
Shoe Release
WWW.SENIXTOOLS.COM
Publicité
