Publicité
Charge Stimulator Now Screen
The Stimulator battery must be fully charged before MRI Mode is enabled. If the Stimulator battery is
not fully charged, the Remote Control will display one of the following messages instructing the patient
to charge the Stimulator before enabling MRI Mode.
Warning:
Always check the Stimulator battery to ensure that it is fully charged before performing a
scan on the patient.
to dismiss the error message and return to the Remote Control Home screen.
1. Press
2. Instruct the patient to charge the Stimulator.
3. Enable MRI Mode once the Stimulator is fully charged.
MRI Mode (For MR Conditional Rechargeable Vercise Gevia Stimulator Only)
Remote Control 3 Instructions for Use
92753326-04
31 of 203
Publicité
