Publicité
Accessing Additional Options from the Main Menu
Program Selection and Activation
A stimulation program is a set of stimulation parameters that determine the patient's therapy. A
program may apply stimulation to as many as four independent stimulation fields or areas, depending
on how the program is set up. For example, one area may correspond to a right brain target,
whereas another area may correspond to a left brain target. The Remote Control can store up to four
programs – numbered 1 through 4 – for the patient to select and activate at any time.
1. Press the
button on the left side of the Remote Control to display the Programs screen.
Note: You can also navigate to the Programs menu from the Main Menu. See the "Accessing the
Main Menu" section of this manual for additional instructions.
2. Select
Change Program.
3. Press the Up
or Down
Arrow buttons to navigate to the desired program.
4. Press the Right Arrow
button to select the program.
Remote Control 3 Instructions for Use
92753326-04
7 of 203
Publicité
