Using The Appliance; Prior To Use; Thermostat; Filling The Cabinet - Gamko FK Mode D'emploi

• Clean the cabinet prior to use. For further details we refer to chapter maintenance.
• Leave the installation to stand for at least 2 hours before switching on the cabinet.
• Plug into a grounded power socket.
• Do not place any heavy objects on the top panel of the cabinet.
Using the thermostat
For use and settings of the thermostat, please refer to the manual supplied with this
product.
XR02CX
To see the set point.
1. Push and immediately release the SET key, the set point will be showed;
2. Push and immediately release the SET key or wait about 5 sec to return to
normal visualisation;
To change the set point.
1. Push the SET key for more than 3 sec, the value will be displayed and the °C
LED starts blinking;
2. To change the set point value push the arrows and to memorise the new set
point value push the SET key again or wait 10sec.
•
This product is only to be used for the refrigeration of packed beverages.
• Fill the cabinet during a period when it is least used. Repeatedly opening of the door
will slow down the refrigeration of the products.
• Beverages with a high alcohol percentage should always be stored properly sealed in
an upright position.
• For optimal cooling performance keep a space between kegs and the internal sides of
the cabinet.
TO GUARANTEE OPTIMAL PERFORMANCE AND AIR CIRCULATION THE AIR
VENTS OF THE CABINETS SHOULD NEVER BE OBSTRUCTED.
NEVER USE THE CABINET TO STORE ELECTRICAL APPLIANCES!
HINT! Apply the so called First-in First-out principle when serving beverages
out of the cabinet. This to ensure that the coldest product is served.
30
5

Using the appliance

5.1
5.2
5.3

Filling the cabinet

User Manual

Prior to use

Thermostat