Télécharger Imprimer la page

HP StorageWorks MSL4048 Manuel D'utilisation Et De Maintenance page 101

Masquer les pouces Voir aussi pour StorageWorks MSL4048:

Publicité

B
Conformité et sécurité
Conformité avec la réglementation
Numéro d'identification de conformité (RMN)
Pour assurer la certification et l'identification de ce produit, un numéro d'identification de conformité
unique (RMN) lui a été affecté. Le numéro RMN figure sur l'étiquette du produit, accompagné des marques
et informations d'homologation requises. Pour toute demande d'information relative à la certification de ce
produit, vous devrez communiquer ce numéro RMN. Remarque ; le numéro RMN est différent du nom et
du numéro de modèle du produit.
Emplacement de l'étiquette de conformité
L'étiquette de conformité de la bibliothèque HP StorageWorks MSL4048 est apposée sur la face inférieure
de celle-ci.
Numéro RMN
LVLDC-0501
Classe d'émissions
classe A
Réglementation FCC
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio
Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic
devices, including computers, generate RF energy incidental to their intended function and are, therefore,
covered by these rules. These rules place computers and related peripheral devices into two classes, A and
B, depending upon their intended installation. Class A devices are those that may reasonably be expected
to be installed in a business or commercial environment. Class B devices are those that may reasonably be
expected to be installed in a residential environment (such as personal computers). The FCC requires
devices in both classes to bear a label indicating the interference potential of the device as well as
additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into. Class B devices have an
FCC logo or FCC ID on the label. Class A devices do not have an FCC logo or FCC ID on the label. Once
the class of the device is determined, refer to the following corresponding statement.
Matériel de classe A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user is required to correct the
interference at personal expense.
Matériel de classe B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
Manuel d'utilisation et de maintenance de la bibliothèque MSL4048 de sauvegarde sur cartouches 101

Publicité

loading